MAXIM New Products - MAX14689
2013-11-07
MAX14689

Ultra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches

Industry's Smallest DPDT Can Switch ±5.5V Signals with a Single VCC as Low as 1.6V

Description

The MAX14689 ultra-small, low-on-resistance (RON) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails™ capability that allows signals from -5.5V to +5.5V to pass without distortion, even when the power supply is below the signal range. The low on-resistance (0.25Ω) also makes the device ideal for low-distortion switching applications, such as audio or video.
The MAX14689 is fully specified to operate from a single +1.6V to +5.5V power supply. Because of the low supply current requirement, VCC can be provided by a GPIO. When power is not applied, the switches go to a high-impedance mode and all analog signal ports can withstand signals from -5.5V to +5.5V. The switch is controlled with a single control bit, CB.
The MAX14689 is available in a 1.2mm x 1.2mm, 0.4mm pitch, 9-bump wafer-level package (WLP), and operate over the -40°C to +85°C extended temperature range. 

Key Features

  • Distortion-Free Beyond-the-Rails Signaling
    • Negative Voltage Audio and Video Signal Capable
    • -5.5V to +5.5V Analog Signal Range Independent from VCC
    • On-Resistance 0.25Ω (typ)
    • +1.6V to +5.5V Single-Supply Range
    • Total Harmonic Distortion Plus Noise 0.001% (typ)
    • On-Resistance Flatness 0.001Ω (typ)
  • Low Supply Current 40µA (typ) at 1.6V
    • Can be Powered by GPIO
    • High-Impedance Mode when VCC Not Applied
  • ESD Protection on COM_
    • ±15kV Human Body Model
    • ±10kV IEC 61000-4-2 Air Gap
    • ±8kV IEC 61000-4-2 Contact
  • ESD Protection on NC_ and NO_
    • ±15kV Human Body Model
  • Design Flexibility
    • Break-Before-Make Operation
    • 9-Bump WLP (1.2mm x 1.2mm) Package
    • -40°C to +85°C Operating Temperature Range 
  •